This "Silver Gauges" pack contains components by other authors: Credit goes here.

Gauge faces and knobs are the artwork of hangar-8, and can be downloaded individually here: http://www.wincustomize.com/window.asp?Cmd=COMMENTS&Lib=29&SkinID=4386
Weather icons for the weather gauge have been modified from the Stardock provided PNG icons. See readme.txt in the MyWeather directory.

--------------
INSTALLATION
--------------

1. Requirements.
   a. ObjectDock is required, ObjectDock Plus is highly recommended (so you can use all gauges on a seperate dock).
   b. Make sure you have SysStats installed - it is required for most of these gauges.
   c. You will need Motherboard Monitor 5 to take advantage of some of the gauges.
2. Procedure:
   a. Unzip the entire arachive into the ObjectDock base directory.
   b. Add "New SysStats" item to your dock.
   c. Right Click the new item, and select "Load"
   d. Navigate to the SysStats/config directory, and select one of the files beginning with sg_*.ini

--------------
WEATHER
--------------
1. Right-Click "Configure Meters" on the weather item.
2. On the left, under"Meters", select "Weather" and then click "Configure"
3. Change the zip code in the weather item to your own.

Example:
		Default: (Nacogdoches, TX)
	http://xoap.weather.com/weather/local/75965?cc=

		If your zip code is 84106 (Salt Lake City, UT), you would change it to read:
	http://xoap.weather.com/weather/local/84106?cc=

		If you live outside in Rome, Italy, and want metric, it will look something like this:
	http://xoap.weather.com/weather/local/ITXX0067?cc=*&unit=m

	To find other international codes, use the code from the URL on www.weather.com when you check your local weather.

--------------
PROBLEMS
--------------
Some configurations may have to be adjusted for your system.
1: Fan Speed: You may need to change which MBM5 meter this reads.
2: Network: Depending on your network configuration, you may need to change which "PDHMeter" this reads.

   
